This bike is my version of a center-steer, negative-trail “Python” recumbent bike that I built around 5 years ago. It was my first welding project and my first bike. This style of bike is supposed to be unrideable. This isn’t the case in reality; it’s just difficult and takes practice.
For me, it was more of a proof of concept, rather than something to ride seriously. The frame is in my garage attic and most of the components have found homes in other projects.
Here’s a 70′s vintage ladies Huffy “Sea Pines” 3-speed I picked up for cheap. It’s slated to be a birthday present for my mom (so don’t mention it to her until after the end of the month, please!). It needed refurbishment badly. After disassembly, cleaning, rust removal, polishing, and a few new parts, it looks very good and runs at least as good as new.
My mid-90′s Trek tandem was due for some alterations. It was getting to be unridable because of the handlebar and seat setup. I would get upper back and arm numbness. I picked up new riser bars, Cloud 9 seats, cork grips, and home built wooden fenders. I’m quite pleased with the results.
The first of my three bike projects this spring, this is an 80′s vintage Concord Freedom 12 that I’ve converted to single speed. I picked it up at the local thrift store for $15 a few years ago for the $40 saddle that was on it. I kept it around because on the nice large frame that fit me well. I completely disassembled, cleaned, washed, waxed, oiled, and greased everything. I also removed everything that I deemed unnecessary for a single speed. Many people go with one or no brakes and use the pedals to slow down with a fixed gear bike. I’m not overly thrilled with trading a very small amount of weight for safety. Also, being a flip-flop hub, I want two separate breaking mechanisms when using the freewheel side.
The saddle is from an 80′s Raliegh. It’s old, but it’s in good condition, fully sprung, and comfy. I’d like to replace it with a Brooks b135 next year. There’s a new moustache handlebar wrapped with cork tape. It looks racier flipped down, but my back isn’t up to that these days.
I took a chance on a Retrospec 700c flip-flop hub wheelset. It was pretty cheap on Amazon.com. They need some touch-up trueing, but I’m happy with them. There’s new single-speed chain and new pedals with toe cages and straps (I’m not a clipless fan).
It’s by far my lightest bike. I need to get mirrors, bags, and lights installed, but for well under $200, I’m very pleased with the outcome.
Cleaned, greased, and re-laced an 80′s vintage 27″ wheel for my recumbent today. It’s on the original bike while I wait for a replacement 700C wheelset to arrive.
I tried out a non-standard lacing pattern. I like the looks, but will likely only do the front wheel as it isn’t quite as strong (but plenty strong for this purpose).
I just need to finish trueing it and it’ll be ready for the trails!
Update: I may do a rear wheel if I can dig around for spokes of the correct length amidst my pile of wheels. I have two decent vintage 27″ wheels with new tires now for my recumbent. I may re-lace one with this pattern for toodling around and keep one with standard lacing for long rides.
Update: It doesn’t look like I have the spokes I would need, so no rear wheel after all.